Lcd Tv Stand Wheels

LCD TVs are made to give you high definition and quality picture for a more magnificent observing experience. And in order to maximize the performance of your LCD TV, it deserves the best and lasting stand. It will heighten the beauty of your television in it is entirety. But how do you choose a perfective stand to match your LCD TV?

Varieties of LCD TV stands are coming out in the market. They come in dissimilar shapes, sizes, designs and texture. This means that the buyers have a wide range of selection – big or small; wood, fiberglass or metallic. It is up to you to choose the one that fits your taste.

When purchasing an LCD TV stand, there are galore things that you need to consider. First, you will have to assure that the stand is firm and lasting to aid the weight of your television. It does not mean that if the stand is more prominent then it may hold the capacity of the TV. It is advisable to check your TV manuals to verify it is weight capacity. You also need to look at the materials on which the stand is made of, this will lead you in choosing the right one.

The space in your room is the second thing that you need to consider. If you are tired of always finding the right position for your TV stand, you will need to check on your floor space. If you have wide living room, stand with a swivel might be the suitable one. If you have sufficient space among the stand and the wall, then you may turn your TV in a full 360 degrees rotation for flexibleness in observing – this is the intent of the swivel. Now, if you find it hard to transfer stand from one room to another, better to use a stand with wheels or casters. This portability feature makes it easy to move your LCD TV.

The third contemplation is the design of the stand. Certain designs may not conform to the theme or motif of the room where the stand will be placed. The color, the texture and the material of the stand will have to have concord with the room for you to be grateful for the beauty of your LCD TV and to make your observing experience more relaxing.

Prices of LCD TV stand range of hundred to thousand dollars depending on it is quality, design, capacity and material. That must not be a problem, use your creativity, call a carpenter to help you build your own stand according to your preference. Thus, you will surely be grateful for the stand designed by no other than – yourself.

Stylishly industrial, the Sanus Systems PFFP2B flat panel television stand securely holds your LCD or plasma television in place while also permitting it to tilt up and down for optimal looking at angles. It has a VESA compatible mounting bracket at the top that will accommodate the VESA 50, 75, 100, 200mm x 200mm and 200mm x 100mm mounting hole patterns. Once the TV is secured to the bracket, you may adjust the TV’s angle by 12 degrees either up or down. The mounting bracket may hold TVs weighing up to 130 pounds (screens from 30 to 50 inches).

It features two adjustable, tempered glass shelves. With the TV bracket mounted in the most eminent position, you may move the adaptable shelves up and down within a range of approximately 2.5 feet. The top shelf measures 24.25 x 16.5 inches and the middle shelf measures 30.25 x 16.5 inches, and each may hold up to 50 pounds. The base shelf measures 43.25 x 23.5 inches for a steady footing. Audio/video cables may be concealed in the stand’s pillar, so your setup has a clean, uncluttered look. Assembly required

What’s in the Box
Mounting bracket, base, pillar, two glass shelves, hardware

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Image

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Photo

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Image

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Picture

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Photo

Lcd Tv Stand Wheels

Lcd Tv Stand Wheels Picture


Most helpful client reviews

68 of 69 people found the following review helpful.
5Worth each penny!
By T. Tio
Like most people, I was excessively affected emotionally to buy a plasma TV just because it is wall mountable. But realistically, I didn’t want to drill huge holes in my wall, nor pay $500 for it to be in a professional manner installed. And I soon came to realize that even if I did mount the TV on the wall, I would still need to have a tacky looking AV stand for all of my other components. This stand solved all of my problems! It’s sturdy, looks great, is reasonably priced, and it’s easy to assemble.

When the package arrived, the box was trashed gravely from shipping. I’m convinced that UPS was the one to re-tape the whole thing together because I found a box cutter inside the box. Though, to my surprise, because SANUS packaged the product so well (lots of styrofoam), not one thing was damaged. Inside the package is the base, the shelves, hardware necessitated to mount the TV including allen wrenches (all you need to supply is a monkey wrench and a phillips screwdriver) and an extra set of black feet for the stand (the base comes with silver feet attached). The base is a shiny black, and the glass shelves are tinted.

Putting this stand together was more comfortable than anything I’ve ever purchased from IKEA (takes no more than half an hour including unpacking the box). Every bolt and screw is labeled, and the manual is detailed. It looks daunting at first, but you only end up using half of the supplied bolts/washers/etc. I commend mounting the TV before screwing the glass shelves into the post and hooking up elements for ease of mobility. An extra hand is helpful, but I was competent to mount a 42″ plasma by myself.

The mounting bracket and shelves are adaptable and may move vertically up and down the post, but must be done so by unscrewing the bolts that hold them in place. The TV may be tilted up and down, but not side to side (this may be done without unmounting the TV).

Just to give you an idea of how a heap of constituents you may fit on the stand, I have a speaker on the top shelf, cable box and PS2 on the middle shelf, and receiver, TiVo, and DVD player on the base. I don’t have room for any more though.

Considerations: There isn’t much room inside the post to put all of your cables. And it’s not the easiest task either – actually took me longer to thread the cables through than put the stand together. But realistically, the only cables that need to go inside are those that connect directly to your TV. The rest of your cables (ie. DVD to receiver etc.) will be concealed behind your components. Also, you must only have to do this once upon set up, so in the end it is well worth it.

Which brings me to my next topic – if you have a lot of constituents and a lot of wires, it becomes more difficult to hide them visibly because this is not an encased stand. It helps if you use HDMI to cut back on the number of cables you have, or if you have short cables and don’t have a lot of bunched up excess wiring. Luckily, my solution was to put this stand in the corner of the room, so you can’t actually see anything from the side view.

All in all it was well worth each penny (and I was skeptic in regards to spending $300+ on such a simple looking piece of furniture). The most inexpensive price by far was online through Amazon. I would by this stand again in a heartbeat. Amazingly, my TV looks larger mounted on this stand than it did sitting on my old one. My only regret is that I didn’t buy this stand sooner!

EDIT: It is now nearing the end of 2008, almost 2 years later. I still use this stand and still think this stand is great. It even withstood a U-haul move. But, flat panel TV’s are much more lowcost and main stream than they were a few years ago. Having said that, when I was looking for a ‘mountable’ stand back then, I didn’t have some options. Now, you may find a decent one at Walmart for $100 that even swivels. I do still think it’s a great stand that looks much better than a lot of I see today, but the steep price tag makes it less beautiful now when there are for less alternatives.

But, you’ll be glad to know I’ve likewise purchased a new TV since then, and this stand accommodated the larger size while still using the same brackets and screws from my last TV (both comply w/ VESA standards).

19 of 19 humans found the following review helpful.
5Great Product
By M-Lo
So I took a leap of faith and purchased this stand without seeing it in person. Let me tell you that the picture provided by Amazon does not do this justice. My orignal worries were the shelves were too little and the stand too tall. Boy was I wrong. The shelves were ample in size. On the littler top shelf alone I was capable to place the Wii, PS3, and Xbox 360 with HD-DVD drive (all vertically standing). And place a dvd player and receiver on the bottom glass shelf. Word of warning re: glass shelving do not place anything with weight on the outer perimeter (duh) it is glass and may break. Couple of complaints. The instructions were not as simple as pictured (take your time) exceptionally with the mounting of your TV. I applied this with the Samsung LN-S4095D 40″ 1080p LCD HDTV and it looks Spectacular. Other complaint Delivery was HORRIBLE. The box was tattered and the deliverance took alot longer than specified. I’m a prime fellow member and upgraded for 1 day shipping. I waited 3 days to get it. All UPS and Amazon could say was sorry and refund my $3.99. Again GREAT PRODUCT. HORRIBLE SHIPPING and execution by UPS and Amazon.

15 of 15 humans found the following review helpful.
5Easy to put together and beautiful!!!
By Binh Lam
This is the perfective width stand for an 46″ HDTV. It hangs it very secure and would likewise be good for 52″ screens, altho at 52″, the set will be noticeably wider than the stand.

The glass shelves themselves are astoundingly strong tempered glass that may supposedly support up to 50lbs, even though you in all likelihood would not to put a big size amp/receiver on it. However, it seems strong sufficient to aid my huge 25 lb center speaker, which thanks to the adaptable shelves, I am competent to elevate it to only half an inch underneath my TV which is idealisti for movie watching. I was worried at original that the center spkr might be too heavy but it has been sitting beauteous on it for in regards to 3 weeks now.

I applied the wider sized glass for the top shelf to accomdate my extra wide center spkr and my dvd player on the glass shelf under it. My receiver sits at the base of the stand and I will always rest easy knowing that the receiver has PLENTY of ventaliation thanks to the open design and adaptable height shelves.

The pole itself is one solid piece of extruded alumimum that is thick and very well constructed. It is in all probability the firmest piece in the kit. The base likewise has reinforced metal framing underneath the MDF wood base, so there are no worries in regards to either the base or pole failing. The only thing that is not impressive is the black finish of the base which is rather nice to look at and shiny, but you may tell that the layer of lacquer used is rather thin and could wear out over time or chip without apparent effort if you’re not careful. Also, due to the finish and the glass shelves, there will be visible dust buildup after a week or so.

This project is for the most part a 1 man project, but you will probably need 2 humans when it comes time to mounting your bigscreen LCD or Plasma to the stand for anything 42″ or bigger. Tools required will be a phillips screwdriver and wrench for the 6 huge screws at the base where the pole sits. The rest of the screws all use allen wrenches which are provided.

Also word of counsel for the glass shelves. Try not to put anything heavy that is made out of metal or ceramic directly on the glass surface. While their structure is rather strong, tempered glass may effortlessly shatter into thousands if pieces you knock it with something made of metal/cermamic. If you want to put anything that has metal or ceramic on it, then make sure it has rubber feet or something in between.

See all 70 client reviews…

This entry was posted in Lcd Tv Stand and tagged , , , , , . Bookmark the permalink.

Comments are closed.