Sonitus 44 Tv Stand Mount

Sonitus  44  Tv  Stand  Mount

Despite being sleek and slim, plasma TVs are rather heavy. You’re going to need to ask for the assistance of somebody strong. A 50-inch plasma TV may weigh as much as a hundred pounds. The last thing you want to do is to grossly miscalculate the capacity of the wall mount you’re picking, leading your costly TV to ruin. Remember that the right TV wall mount is critical to the safety of your HDTV or flat plasma.

If you are to affix a TV mount onto your drywall, screwing the mount to wooden studs is indispensable to keeping it in place. In case your arid wall has metal frames, you’re going to need fixtures that are spring loaded.

1. Go to a hardware store and buy a stud finder for less than $19 or so. A stud finder is an necessary tool that will concede you to pinpoint the emplacement of studs in the wall.

2. Pick a wall where you want to mount your television and use the stud finder to find studs on the wall. Studs concede you to affix screws on something solid.

3. Mark the where the studs are and measure the distance among the screw holes of the mount.

4. Think when it comes to how high you want your flat-screen to be. Level your mount in your desired position and drill holes into the studs.

5. Consider your wiring scheme in terms of the other gadgets you intend to use with your TV, and arrange things as you see fit.

6. Drill in the screws of your wall mount. Be sure that it is nicely and securely affixed.

7. Test the strength of the mount by putting a good deal of of your weight into it. If it stays in place, then it’s ready for the television. If it moves, you have to tighten the screws and repeat the test. Once you’re sure that it’s secure, you may mount your precious flat panel on the wall.

Ask yourself how you ordinarily watch TV-do you walk around the room, doing things while you watch TV? Is there an existent glare coming from outside that you’d like to correct? A good wall mount may go a long way when it comes to your TV enjoyment. Among the available kinds of wall mounts are:

• basic flat screen TV wall mounts

• swivel mounts

• articulating mounts

• ceiling mounts

• tilt mounts

Choosing the right wall mount in truth has to do a lot with your personal preference and space availability. The essential thing is that you mount that TV someplace will you will be happy with the location. You want to be competent to receive pleasure from the TV for a long time.

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Picture

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Image

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Photo

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Picture

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Pic

Sonitus 44 Tv Stand Mount

Sonitus 44 Tv Stand Mount Pic


Most helpful client reviews

2 of 2 persons found the following review helpful.
5It’s art!
By Old Dude
My wife and I think this TV stand is utterly gorgeous! We’re buying a 55″ Panasonic G10 plasma TV for ourselves for Christmas which we don’t want to wall mount. We live in the Puget Sound WA area which is earthquake prone, so we likewise didn’t want to just buy a console and plop the TV on top of it, even with wall straps. There aren’t too galore stands that will take a huge flat screen. This one scarcely does. It measures with regards to 19 3/8″ from the top shelf to the center of the mount, which is not rather sufficient to clear the center speaker of my 5.1 system. However, there are sufficient mounting holes in the brackets that bolt to the TV that I think I may nudge it up 2″ more so that won’t be a problem. There is a great deal of room, both vertical and horizontal, on the bottom shelf for both my Pioneer SC-07 receiver (enormous) and my APC power conditioner. The second shelf has room for the DVR stacked on the DVD player, with the center speaker on the top shelf.

“Some assemblage required.” This is a very complex system, though not too perplexed if you go tardily and look closely at the instruction sheet. The instructions are for the most part line drawings with numbers that match up to the suitable baggie of nuts, bolts, washers, screws, and such. A great number of them. A 10mm wrench and an Allen wrench are likewise included. I put it together over the course of a couple of evenings, and even with a glass of wine, I only made one little mistake, when I stuck all of the little package of silicone dots amidst the steel frame and the bottom shelf. Fortunately, our local builder’s store had more of them very cheaply, so now I have little gummy-dots beneath the other two shelves as well. The steel frame is piano-black, shiny powder-coat, and the tempered glass shelves are opaque or scarcely translucent black. It goes well with our evenly shiny black NHT Verve speakers and other electronics. This stand is very sturdy and well balanced. Mine was drop-shipped from Avista in Southern California and arrived in 4 days in perfective condition. The packing is very well done, with the glass in fitted styrofoam, inside a box, inside the shipping carton. We were a little concerned that the size might over-power our watching room, but it just kind of floats in space, so our worries were for nothing. We couldn’t be happier with this purchase. Now all we are waiting for is Black Friday and the TV.

0 of 0 persons found the following review helpful.
3decent….
By huge spender
customer service sucks a big one. The TV stand came without a lot of veryimportant pieces need to finish the finished product **** if you determine to buy this product before assemblage check for all the parts(i will have to have listened to my brother who was helping me with assemblage who said to check parts). very expensive. i was angry when my bookshelf center speaker did not fit the top shelf. the shelves do not adjust and that sucks becuase i need to position the center channel speaker to the middle shelf. next time im going with omni mount for the wall install. Avista turned me off. i will never use them again.and it is too damn expensive. If you determine to use the wire management scheme as intended by the manufacturer do not suppose to hide all the wires well if you have a great deal of gadgets such as receiver, center channel, ps3, cable box, and PC which is on my stand. i expended the $400+ not worth it really.

See all 2 client reviews…

This entry was posted in Television Stands and tagged , , , , , . Bookmark the permalink.

Comments are closed.